Metal ridge end overlaps

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   Catfeesh (Catfeesh) New member Username: Catfeesh Post Number: 6 Registered: 12-2011 Posted on Sunday, January 01, 2012 - 07:20 pm:        I've watched them all. Thanks Joe!   Joe (Joe) Moderator Username: Joe Post Number: 665 Registered: 07-2006 Posted on Sunday, January 01, 2012 - 01:57 pm:        We overlap them about 3 inches, maybe more but not less and no, we don't use silicon, but it won't hurt. Did you watch the video we have showing this ridge being installed? http://www.slateroofcentral.com/videos.html#ridge   Old_school (Old_school) Senior Member Username: Old_school Post Number: 753 Registered: 01-2009 Posted on Saturday, December 31, 2011 - 07:35 pm:        What does "Jenkins" recommend? = WDJR I have seen bracelets similar to that.   Catfeesh (Catfeesh) New member Username: Catfeesh Post Number: 5 Registered: 12-2011 Posted on Saturday, December 31, 2011 - 06:44 pm:        When installing several lengths of ridge metal (eg. Jenkins 20 oz, copper ridge roll), what is the ideal overlap measurement between two pieces? Is silicone recommended? -Thanks-