| Author | Message | ||
     Milo (Milo) Junior Member Username: Milo Post Number: 13 Registered: 05-2009 |
Sorry Jesse for my first response...i must not have read your question thoroughly. another source which has some details which i dont think were in either the "Copper and Common Sense" or the US version of the manual put out by the US CDA is found on this site (the english CDA) http://www.copperinfo.co.uk/arch/detailing/double-lock-standing-seam.shtml MILO | ||
| Milo (Milo) Junior Member Username: Milo Post Number: 12 Registered: 05-2009 |
you can also try the website: www.thesheetmetalshop.com I picked up a CD ROM found on their library for around $15.00. One good title included had lots of architectural info "The Universal Sheet Metal Pattern Cutter..VOLII Architectural Sheet Metal Work" by William Neubecker. 1920's era, but some of its content is probably relevant today. MILO | ||
| Bud (Bud) Senior Member Username: Bud Post Number: 58 Registered: 02-2010 |
google it, you should be able to pull out cad drawings with the details. Viewing these drawings may be tough if you don't have a program that will view them. If you can't find them, let me know I will see what I can do to put you on to them. Otherwise you will need to look at the suggestions offered by the other posts, not much else is out there. Another place to look at is ESEmachines.com. | ||
| Milo (Milo) Junior Member Username: Milo Post Number: 11 Registered: 05-2009 |
"Copper and Common sense" put out by Revere Copper | ||
| Old_school (Old_school) Senior Member Username: Old_school Post Number: 588 Registered: 01-2009 |
Try the SMACNA manual | ||
| Jesse (Jesse) New member Username: Jesse Post Number: 4 Registered: 10-2010 |
Anybody know of any copper roofing books that provide complex roof details and how to cover them or any reference manuals besides copper and common sense that show real field techniques. |
